Yutong Fuel Mining Truck
Yutong Fuel Mining Vehicle is committed to building four core advantages of safety, reliability, efficiency and economy.
Failure rate reduced by more than 50%
2m³ larger than other brands
Oil bath three-stage filtration, with a rate up to 99.99%
38mm taper pin/cotter pin, largest in the industry
Basic parameters | |
---|---|
Length × Width × Height (mm) | 9175×3200×3930 |
Wheelbase (mm) | 3800+1550 |
Maximum gradeability | 30% |
Minimum turning diameter (m) | 23 |
Rated load mass (kg) | 40000 |
Chassis | |
---|---|
Engine | Weichai WP12G380E310 |
Transmission | FAST seven-gear transmission |
Front axle/middle axle/rear axle | Rated load 13/25/25t, drum-type brake |
Suspension system | Front and rear steel plate suspension, rear stabilizer bar, maintenance free balance shaft |
Fuel tank | Standard configuration: 420L |
Tire | 14.00R25 steel wire tire |
Frame | High-strength steel |
Upper structure | |
---|---|
Lifting system | One way lift cylinder |
Compartment volume (m³) | 25 (flat-mounted, non-metallic mine) |
*Disclaimer:
This configuration table is for reference only and does not serve as a basis for contract negotiations. The actual vehicle shall prevail.